Welcome to Makers India

Cart

Cart

Your Cart is Empty

Back To Shop

Cart

Cart

Your Cart is Empty

Back To Shop

Category: Figurines

Figurines

Showing 1–50 of 73 results

  • 0 out of 5

    Michelangelo’s David Head Bust Portraits Art Sculpture Resin Crafts Concrete Decorations For Home Mini

    Product Name: David Head Bust Statue
    Size Information (Length Thickness Height):
    David: Width 9.5cm, Depth 9.5cm, Height 15cm
    Material: PLA Bio Plastic, Resin

    The surface is relatively smooth and delicate, much better than the average plaster. Can be used For art to copy from, as a still-life, or for life drawing.

    ☑️ This product is high-quality PLA bioplastic, resin. The surface is delicate and not fragile.
    ☑️ If it is dirty, it can be washed with water. Dip some washing powder and wipe the dirty place with a damp cloth.
    ☑️ The base is carefully welded and stable.

    Materials: Medium: Natural Biodegradable Plastic, Handmade
    Add to cart
  • Store:  Dear & Sacred
    0 out of 5

    Venus of Willendorf

    This finely detailed, Museum quality, little statuette measures about 11cm (4.4 inches).

    Each one of these little ladies is individually hand-painted with great care, so no two are alike, there can be slight color variations and might be slightly different from the pictured item.

    The original Venus, carved from oolitic limestone and painted with reddish ochre, is estimated to have been carved between 28000 and 25000 BCE.

    Hight: 11.1 cm / 4.4 in
    Width: 6.1 cm / 2.5 in

    Material: Ceramic plaster
    Note: the statuette has no stand

    Add to cart
  • 0 out of 5

    This 3D printed replica of Michelangelo’s David Head Bust Art Sculpture. This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    The full statue of David can be found here.

    3D Printed with PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
  • 0 out of 5

    Venus (Aphrodite) is the goddess of love. She was depicted in the nude or in various stages of nudity (and painted). The figure is executed in the Hellenistic style and famed for its sensuous appearance. It supposedly lost its arms in a struggle arising between two groups of soldiers who sought to claim it as loot when it was first discovered on the island of Milos. The statue’s fame is partly the result of propaganda. It was discovered in 1820 and acquired by the French state shortly after Napoleon’s fall in 1815, at which point the French had to return another Venus figure, the Venus Medici (KAS1241) to Italy after Napoleon had seized it as spoils of war.

    To compensate for their loss the French promoted the Venus de Milo as the loveliest of all antique statues of women. An Englishman even commissioned a plaster cast as early as 1822, despite the fact that the French and the English were arch-enemies at the time, and today the statue remains far more famous than the Venus Medici.

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Naked female body vase
    The product is made in 3d printed in 2 different sizes

    Dimensions:

    15 cm / 20 cm optional
    &
    6.0 inches / 8.0 inches

    ** Set of 5 color options includes 2 different sizes.

    Color: White, Black, Grey, Gold, Bronze

     

    ** Plants NOT included

    If you are in a rush in your order, please drop us a message for Express Shipping.

    Select options
  • Store:  Indian Heritage
    0 out of 5

    The Replica is created using the 3d printing technology with high precision and quality takes 6 hours to make using Resin, PLA Bioplastic. The Sculpture comes in multiple color options you can choose between and the size of the sculpture is given below.

    Dimension:

    • Length: 6.8 cm
    • Width: 5.4 cm
    • Height: 13.0 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    Lakshmi (/ˈləksmiː/; Sanskrit: लक्ष्मी, IAST: lakṣmī) or Laxmi, is the Hindu goddess of wealth, fortune and prosperity. She is the wife and shakti (energy) of Vishnu, one of the principal deities of Hinduism and the Supreme Being in the Vaishnavism Tradition.

    Lakshmi is also called Sri or Thirumagal because she is endowed with six auspicious and divine qualities, or gunas, and is the divine strength of Vishnu. In the Hindu religion, she was born from the churning of the primordial ocean (Samudra Manthan) and she chose Vishnu as her eternal consort. When Vishnu descended on the Earth as the avatars Rama and Krishna, Lakshmi descended as his respective consort.

    The Replica is created using the 3d printing technology with high precision and quality takes 8 hours to make using Resin, PLA Bioplastic. The Sculpture comes in multiple color options you can choose between and the size of the sculpture is given below.

    Dimension:

    • Length: 5.7 cm
    • Width: 3.1 cm
    • Height: 13.0 cm
    Select options
  • 0 out of 5

    This is a high-quality 3D printed copy of Le Réveil / Galatea

    This slightly larger than life sculpture titled ‘Le Réveil’ (fr. reawakening) depicts a nude female stretching as if awakening from sleep.

    Laurent-Honoré Marqueste was a French sculptor, born in Toulouse, working in the neo-Baroque Beaux-Arts tradition. He was famed for his large number of allegorical figurative sculptures ‘Perseus Slaying Medusa’ and ‘The Centaur and Deianira’

    Made from creamy white PLA bioplastic. The statue comes in 3 size options:

    Select options
  • 0 out of 5

    David The Biblical Hero from the 16th  Century come live to you as a replica of the original David Sculpture made with Marble which takes 19hrs of making weighs 100gm (approx)

    All of the products are handmade and 3D printed.
    We work on them meticulously and this makes them unique with the options of different colors and sizes.

    If you have a particular demand, please don’t hesitate to contact us!

    **Our products are made in 2-4 days after ordering. Thank you for your understanding.

    Materials:
    PLA (Bioplastic)
    Plaster (inside)
    Acrylic Paint

    SHIPPING:
    *All orders are carefully packed for shipping shipped by Makers India via their shipping partners.

    Select options
  • Store:  Heighflier
    0 out of 5

    Head Bust Portraits Art Sculpture for Decorations,  art showcasing, jewelry holder and home decorations.

    Customised head bust sculpture gives you the option to choose between variety of roman, ancient, greek, mythological, biblical characters.

    After placing order we’ll contact you with the designs are requirements also, you can add your request with your whatsapp number in the note section while placing the order.

    Multiple size and color options available, choose from below or leave us a message to know more.

    Select options
  • Store:  The Tree Thing
    0 out of 5

    A statue of a loving couple made of wood to present to him and her on Valentine’s Day.

    Valentine’s Gifts to celebrate.

    * 100% handmade and finished.
    * 100% natural product. Ideal for keeping at home
    * An Eco-friendly design
    * You can choose from a variety of sizes

    Material: wooden and ABS mix

    Available in two sizes:

    18 cm Height: 7.0 cm x 9.0 cm x 18.0 cm

    25 cm Height: 10.0 cm x 12.0 cm x 25.0 cm

    Color – Black Matte Finish

    Select options
  • Store:  Heighflier
    0 out of 5

    Regional Feature: Europe
    Made In India
    Trade name: Farnese Hercules
    Product name: Hercules Figurine Statue
    signed by Glykon
    Material: Concrete
    Home Decor
    Weight: 332 gm
    Size: 9.4 x 7.3 x 19.5 cm
    Material: White Carrara Marble Powder
    Concrete, PLA

    Add to cart
  • Store:  Dream Decal
    0 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Type Trait: Art Material
    Size: 6.29″ x 3.74″ x 3.14 inches (16 x 9.5 x 8 cm)
    Material: Plant-Based Resin

    Add to cart
  • 0 out of 5

    This is a high-quality 3D printed copy of The Mist Statue:

    The woman just got out of the water. The sculpture depicts mist, in folklore a natural phenomenon symbolizing a state between the real and the unreal. The actual motif, though, is the naked female body. It is a real woman expressing pleasure, and not ideal beauty, exposed to the viewer’s gaze. The Mist was very popular and several copies were made. One is at Strömparterren in Stockholm and another in the park of the Garden Society of Gothenburg.

    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a 3D Printed Replica of Vishnu – God of Protection & Preservation, Controller of the Earth. Vishnu is one of the three principal deities of Hinduism – Brahma the Creator, Vishnu the Preserver, and Shiva the destroyer. Vishnu is the God of Preservation, the great maintainer who often appears in various incarnations (avatar) to provide salvation for humanity. His appearances are innumerable; he is often said to have ten avatars—but not always the same ten.
    Hindu tradition describes Vishnu as the all-pervading essence of all beings, one who supports, preserves, sustains, and governs the universe and originates and develops all elements within.

    Type: Vishnu Statue

    Product Dimension:
    • Length: 8.2 cm
    • Width: 13.9 cm
    • Height: 24.5 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    The Replica is created using the 3d printing technology with high precision and quality takes 26 hours to make using Resin, PLA Bioplastic. The Sculpture comes in multiple color options you can choose between and the size of the sculpture is given below.

    Dimension:

    • Length: 12.8 cm
    • Width: 10.1 cm
    • Height: 24.5 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a bust statue depicting Lakshmi or Laxmi, the Hindu goddess of wealth, fortune, and prosperity. She is the wife and shakti (energy) of Vishnu, one of the principal deities of Hinduism and the Supreme Being in the Vaishnavism Tradition. With Parvati and Saraswati, she forms Tridevi, the holy trinity. Lakshmi is also an important deity in Jainism and found in Jain temples.

    The Replica is created using the 3d printing technology with high precision and quality takes 16 hours to make using Resin, PLA Bioplastic. The Sculpture comes in multiple color options you can choose between and the size of the sculpture is given below.

    Dimension:

    • Length: 5.7 cm
    • Width: 3.1 cm
    • Height: 13.0 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a portrayal of Lakshmi, the Hindu goddess of wealth, wellbeing, and prosperity. She is often portrayed with four arms, which represent the four goals of humanity – the pursuit of morals, wealth, love, and self-knowledge.

    The Replica is created using the 3d printing technology with high precision and quality takes 11 hours to make using Resin, PLA Bioplastic. The Sculpture comes in multiple color options you can choose between and the size of the sculpture is given below.

    Dimension:

    • Length: 8.6 cm
    • Width: 6.2 cm
    • Height: 13.0 cm
    Select options
  • 0 out of 5

     

    This is a 3D printed replica of one of the oldest known artworks in existence the Venus of Willendorf is replicated here and 3D printed from a scan of the original piece which dates back to around 28000 -25000 BCE.

    It has been slightly adjusted to allow it to stand up on a stable surface but is otherwise as close to the size of the original i.e., 13cm as I can make it.

    Made from PLA bioplastic. The statue comes in 5 options:

    Select options
  • Store:  Dear & Sacred
    0 out of 5

    We’ve created a replica and more realistic statue with an affordable and smaller in size statue which you can keep in your house or garden for a modern and spiritual sense.

    This bronze Buddha head originally is over one meter high and is all that remains of an enormous statue. Such an image would have been very expensive to produce and must surely have come from an important temple.

    Select options
  • Store:  Heighflier
    0 out of 5

    This Marilyn Monroe planter is made from PLA – a biodegradable plant-based material.

    The best thing about PLA is its biodegradable nature and the sustainable process by which it is made, making it an environmentally-friendly choice of plastic. It is also very light and especially sturdy.
    We believe in quality products, so we only use the highest quality PLA. These 3d printed impressive and unique decors will bring a new ambiance to your home. Choose color and size to match in your place.

    This item is made to order from recycled PLA plastics.

    Select options
  • Store:  Heighflier
    0 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • Store:  Heighflier
    0 out of 5

    This is a high-quality 3D printed replica of Sleeping Bacchante

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Made from Resin PLA bioplastic. The statue comes in 4 size options:

    Select options
  • Store:  The Tree Thing
    0 out of 5

    Baby Groot pencil holder 3D model (unpainted). Made out of PLA plastic.

    8 cm in height / 3.14 inches

    !!!Please note!!!

    – 3D model objects are by no means perfect. Layers and defects may be visible.
    – You order an unpainted 3D model. If the model needs to be primed, select the appropriate item when ordering.
    – We can print this model in different sizes, so just send a message.

    Select options
  • Store:  The Tree Thing
    0 out of 5

    A beautiful gift for Guardians of the Galaxy fans and plant lovers!! 3D Printed Cute Baby Groot Planter! Perfect for Succulents, Cactus & Air Plants.
    It has a tiny drainage hole to prevent over-moisturizing.

    DIMENSIONS

    Height – 4 inches (10 cm)
    Width – 2.7 inches (7 cm)
    Depth (from the front wall) – 3.6 inches (9.2 cm)
    Depth (from the back wall) – 2.4 inches (6 cm)

    ⌀ Diameter – 2.1 inches (5.5 cm)

    ! Please, pay close attention to measurements – pictures can be misleading for scale!
    ! Pencil Holder top is inclined!

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Human Head Planter Female Face Pot

    This planter pot is a great item for your indoor plants’ needs

    The products size is 12.0 cm x 15.1 cm x 14.0 cm

    Our products are specially produced in 3D printers. It is ideal for magnificent home decoration and office decoration. You can use the products with pleasure, there is no harm in terms of health. It is made entirely of organic materials.

    This product can be a gift for living room decoration. It can also be preferred as a homemade flower vase. It is good for a housewarming gift.

    I hope this brings you happiness and luck.

    Select options
  • Store:  Dear & Sacred
    0 out of 5

    3D printed sculpture of Michelangelo’s “David Bust”

    Touch of luxurious elegance to your house.

    Give your home décor a new look with stunningly beautiful art decoration.

    Add an elegant touch to any room.

    David is a masterpiece of Renaissance sculpture, created in marble between 1501 and 1504 by the Italian artist Michelangelo. David is a 5.17-meter (17.0 ft)[a] marble statue of the Biblical figure David, a favoured subject in the art of Florence.

    Add to cart
  • Store:  designnowhere
    0 out of 5

    8″ Deathrooper Stormtrooper Skull

    Handmade

    Materials: White PLA, PLA Plastic, High-Quality Plastic

    This is a 3D Printed Deathtrooper skull standing 8 Inches tall and is printed in very high-quality White PLA Plastic!
    This figure can make for the perfect novelty gift! Any Star Wars fan will love this!
    This model is meant for being displayed or modeled. This can not be used as a toy!
    The material used does allow for sanding, priming, painting, and finishing. Can be painted with a high amount of detail!

    All of our items are proudly made and shipped from India!

    Please note that there might be some imperfections with the product due to 3D Printing!
    Please keep the skull away from the sun as it is slightly vulnerable to direct rays.

    Note: Shipping may take 2-3 days but once shipped, the order will reach you within 5 days

    Add to cart
  • Store:  designnowhere
    0 out of 5

    5″ Deathrooper Stormtrooper Skull

    This model is 3D Printed with very high-quality PLA Plastic! We print it in either White or Silver PLA!
    This figure can make for the perfect novelty gift! Any Star Wars fan will love this!
    This model sits at 5 inches tall and is super fun to paint!
    This model is meant for being displayed or modeled. This can not be used as a toy!

    All of our items are proudly made and shipped from India!

    Please note that there might be some imperfections with the product due to 3D Printing!

    Note: Shipping may take 2-3 days but once shipped, the order will reach you within 5 days

    Select options
  • Store:  Tree Of Hearts
    0 out of 5

    This beautiful statue of two lovers celebrates passion, desire, and love.

    This real-looking statue is so beautiful looking. It will add glamour to any corner of your home.

    Perfect gift for gifting to girlfriend on a dinner date, Gift for girlfriend, Birthday special gift for girlfriend’s birthday, romantic love gift for girlfriend.

    Express your love and feeling with this romantic & amazing couple statue as it portrays a couple filled deep with love just like your love.

    Measures – 25 cm tall.
    Color – White, Black, Grey, Bronze, Gold, and more to come

    Select options
  • Store:  Nirmaan Tech
    0 out of 5

    3D Printed MALE’s Hands
    Larger

    LEFT and RIGHT side Available Message me or leave a note of what side you need.
    Buy 2pcs if you need the Left and Right sides.

    This is a 16 piece 3d printed Hands Joined together with an elastic cord.
    Joints are movable, there is an opening at the bottom to access the elastic cords, You can adjust it to the tension of your liking.

    Measurements.
    Height – 22cm
    Width – about 11cm
    Depth – about 6cm

    We use PLA Plastic

    Select options
  • Store:  Dream Decal
    0 out of 5

    Modern Woman Sculpture, Half Female Bust Sculpture, Face Sculpture, Female Body, African Sculptures, Black Woman Sculpture, Decorative Sculpture, Home Accessory, Room Accessory, Design Sculpture, Christmas Gift Woman Sculpture

    Dimensions:
    35.5 x 22 cm

    A modern sculpture designed to add a unique piece of art to every home. This figurine will add a decorative touch to any room and make a great gift for your loved ones.

    Select options
  • 0 out of 5

    This 3D printed replica of The Farnese Hercules is an ancient statue of Hercules, probably an enlarged copy made in the early third century AD and signed by Glykon, the statue was recovered in 1546 and is now in the Museo Archeologico Nazionale in Naples. The heroically scaled Hercules is one of the most famous sculptures of antiquity and has fixed the image of the mythic hero in the European imagination.

    3D Printed with Resin, PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
  • Store:  Dream Decal
    0 out of 5

    Regional Feature: Europe
    Made In India
    Trade name: Farnese Hercules
    Product name: Hercules Figurine Statue
    signed by Glykon
    Material: Resin, PLA, Handmade
    Home Decor
    Weight: 490 gm
    Size: 11.8 x 9.1 x 24.5 cm
    Material: Plant-Based Resin

    Select options
  • Store:  Dream Decal
    0 out of 5

    Authentic, not a cheap and fake imitation.
    Bronze ornaments.
    Pure hand-made.
    The proud work of India’s Tribal art master.
    Length, width and height: 46cm*26cm*28cm.
    Weight: 11kg.
    Great home or office decoration.
    The selling price includes postage and customs duties.
    If you have any dislikes, you can return the seller’s address and a full refund will be given.

    Read more
  • Store:  Dream Decal
    0 out of 5

    Material: 100% Bronze

    Height: 33 cm
    Width: 65 cm
    Depth: 14 cm

    Perfectly finished, magnificent for any living room in the best bronze quality at the top price.
    Our bronze figures are produced and cast in our foundry in Portugal and France. These are original bronze sculptures, not hard wax/polyresin!
    If you have any questions, just write to us.
    We will be happy to answer your questions.

    Read more
  • Store:  Indian Heritage
    0 out of 5

    Ganesha is shown here with two of his attributes, a broken tusk and a bowl full of modak, of which he is very fond. Although not depicted in this sculpture, Ganesha’s vahana, a rat, accompanies him as he carries out his divine duties. The rat is tiny by comparison to the portly Ganesha, but the two work well as a team. The rat can wriggle into places where Ganesha would never fit—another means of avoiding obstacles and achieving goals.

    This product is replicated from the original scan of God Ganesha Placed at The Art Institute of Illinois, the replica is made with 3d printing technology us eco-friendly PLA material.

    Type: Ganesh Murti

    Product Dimension:
    • 6 Inches: 10.7 x 7.5 x 15.0 cm
    • 7 Inches: 12.8 x 9.0 x 18.0 cm
    • 9 Inches: 16.0 x 11.3 x 22.5 cm
    Select options
  • 0 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David’s Mind
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Weight: 400 gm
    Size: 15.0 x 14.5 x 21.7 cm
    Material: Plant-Based Resin

    Select options
  • Store:  Heighflier
    0 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David’s Mind
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Type Trait: Art Material
    Size: 6 Inch Height, 7 Inch Height
    Material: Plant-Based Resin

    Select options
  • 0 out of 5

    Using a high-precision 3D scanner, we got a high-quality 3D model of a real Sleeping Bacchante. Using modern technologies for 3D printing, we have repeated the Sleeping Bacchante. Now you can put up a Sleeping Bacchante in your home.

    This robust torso was purchased in 1778 by the Grand Duke of Tuscany Peter Leopold from the Gaddi collection, which was located in Florence; nothing is known of the work prior to this date, except that it was part of the above-mentioned private collection.

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Select options
  • 0 out of 5

    This is a high-quality 3D printed replica of Sleeping Bacchante

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Made from Resin PLA bioplastic. The statue comes in 4 size options:

    Select options
  • Store:  Indian Heritage
    0 out of 5

    3D printed statue of Hindu God Shiva.
    It is a replica of the original item is carved out of sandalwood and depicts the divine snake (Shesh Naag) protecting Shiva’s head. The five-headed snake forming a canopy represents the five divine snakes in Hinduism – Astika, Adishesha, Vasuki, Kaliya & Manasa Devi

    Type: Shiva Statue

    Product Dimension:
    • Length: 8.7 cm
    • Width: 13.1 cm
    • Height: 21.7 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a 3D Printed Replica of Vishnu – God of Protection & Preservation, Controller of the Earth. Vishnu is one of the three principal deities of Hinduism – Brahma the Creator, Vishnu the Preserver, and Shiva the destroyer. Vishnu is the God of Preservation, the great maintainer who often appears in various incarnations (avatar) to provide salvation for humanity. His appearances are innumerable; he is often said to have ten avatars—but not always the same ten.
    Hindu tradition describes Vishnu as the all-pervading essence of all beings, one who supports, preserves, sustains, and governs the universe and originates and develops all elements within.

    Type: Vishnu Statue

    Product Dimension:
    • Length: 8.4 cm
    • Width: 8.5 cm
    • Height: 18.1 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a 3D Printed Replica of the Ganesha Statue Sitting In Singhasana At Raja Dinkar Kelkar Museum, Pune, India.

    Ganesha is one of the best-known and most worshipped deities in Hinduism. His image is found throughout India, Sri Lanka, Thailand, Bali (Indonesia), Bangladesh, and Nepal. Although he is known for many attributes, Ganesha’s elephant head makes him easy to identify. He is known as the patron of the arts and sciences and protector of wisdom. He is also the god of beginnings, so is often honored at the start of ceremonies.

    Type: Ganesh Murti

    Product Dimension:
    • Length: 6.9 cm
    • Width: 6.3 cm
    • Height: 13.0 cm
    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a 3D Printed Replica of the Statue of Ganesha, son of Shiva and Parvati, the god of opportunity, Raja Dinkar Kelkar Museum, Pune, India This sculpture portrays Ganesha, one of the most prominent Hindu deities, with his easily recognizable elephant head. The piece comes from Halebid, the capital of the Hoysala Empire (current Karnataka, India). Ganesha is one of the best-known and most worshipped deities in Hindu and Buddhism.

    Type: Ganesh Murti

    Product Dimension:
    • Length: 9.7 cm
    • Width: 8.5 cm
    • Height: 13.0 cm
    Select options
  • 0 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • 0 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • 0 out of 5

    This 3D printed replica of Roman-era Pentelic marble copy of Polykleitos’ Doryphoros on display at the Minneapolis Institute of Art. Although a bit battered and missing part of his left arm, he is still considered among the best-preserved copies in existence.

    To learn more about him, please see this link: Khan Academy. Also, you can check out the Wikipedia page.

    The MIA’s Doryphoros, dating from the 1st century B.C., is a Roman marble copy of a Greek bronze sculpture that was made between 450 B.C. and 440 B.C. by the sculptor, Polykleitos. It is the finest of the five known copies of the entire body of this famous masterpiece that has survived relatively intact.

    3D Printed with Resin. The sculpture comes in 3 size options (Mentioned Below):
    Select options
  • 0 out of 5

    This 3D printed Low Poly Horse figurine is stunning!

    The item is a reproduction of the 33ft tall bronze sculpture in London. Perfect for your desk or to give as a gift.

    Also available in marble PLA which is a 3D printed representation in durable white PLA plastic with gray speckles that resembles marble. Each item is unique, having tiny differences that are produced during printing. This figurine takes a day to complete and will be ready to ship till the next day after post-processing.

    Please see my other items or send me a message requesting something new or personalized.

    Select options
  • 0 out of 5

    This 3D printed replica of Michelangelo’s David Head Bust Art Sculpture. This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    The full statue of David can be found here.

    3D Printed with PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
error: Content is protected !!

Cart

Cart

Your Cart is Empty

Back To Shop