Welcome to Makers India

Cart

Your Cart is Empty

Back To Shop

Cart

Your Cart is Empty

Back To Shop

Showing 1–60 of 89 results

  • 5 out of 5

    This is a custom option for different roman and greek sculptures to decorate your wall. All the sculptures are either museum replicas or inspiration, remember before ordering you must share the link to the scanned copy of the sculpture else the image of the statue you want. The order depends upon the availability of the …

    Read More

    Select options
  • Store:  Inchmetric
    4.5 out of 5

    This Shark Swimming on the Wall 3D Wall Art Home Decor is 225 mm * 131 mm with 3 mm thick, the weight of the Origami is 26.33 gm. Beautify your walls with the artistic make, intricate detailing, variety of colors, and designs this 3D wall Art provides. A one-stop shop for home decor and …

    Read More

    Select options
  • Store:  Heighflier
    0 out of 5

    Head Bust Portraits Art Sculpture for Decorations,  art showcasing, jewelry holder and home decorations.

    Customised head bust sculpture gives you the option to choose between variety of roman, ancient, greek, mythological, biblical characters.

    After placing order we’ll contact you with the designs are requirements also, you can add your request with your whatsapp number in the note section while placing the order.

    Multiple size and color options available, choose from below or leave us a message to know more.

    Select options
  • Store:  Heighflier
    0 out of 5

    This Marilyn Monroe planter is made from PLA – a biodegradable plant-based material.

    The best thing about PLA is its biodegradable nature and the sustainable process by which it is made, making it an environmentally-friendly choice of plastic. It is also very light and especially sturdy.
    We believe in quality products, so we only use the highest quality PLA. These 3d printed impressive and unique decors will bring a new ambiance to your home. Choose color and size to match in your place.

    This item is made to order from recycled PLA plastics.

    Select options
  • Store:  Heighflier
    0 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • Store:  Heighflier
    0 out of 5

    This is a high-quality 3D printed replica of Sleeping Bacchante

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Made from Resin PLA bioplastic. The statue comes in 4 size options:

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    People Playing Guitar Planter Zen Garden Pot for Cactus Succulent
    These 3d printed impressive and unique decors will bring a new ambiance to your home.
    We use natural plastic PLA in our products.

    It was produced by hand by us.
    We produce Eco-friendly organic plastic.
    We use completely recyclable material, it is biodegradable and environmentally friendly.
    Unlike traditional petroleum-based plastics, it is made from cornstarch and sugar cane.
    Plants are not included.
    Dimensions: 10.5 x 9.8 x 12.0 cm

     

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Cute People Planter Cactus Succulent Pot Zen Garden Home Decor
    These 3d printed impressive and unique decors will bring a new ambiance to your home.
    We use natural plastic PLA in our products.

    It was produced by hand by us.
    We produce Eco-friendly organic plastic.
    We use completely recyclable material, it is biodegradable and environmentally friendly.
    Unlike traditional petroleum-based plastics, it is made from cornstarch and sugar cane.
    Plants are not included.
    their height varies between 10cm and widths between 8-14cm depending on the model.

     

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Cute People Planter Cactus Succulent Pot Zen Garden Home Decor
    These 3d printed impressive and unique decors will bring a new ambiance to your home.
    We use natural plastic PLA in our products.

    It was produced by hand by us.
    We produce Eco-friendly organic plastic.
    We use completely recyclable material, it is biodegradable and environmentally friendly.
    Unlike traditional petroleum-based plastics, it is made from cornstarch and sugar cane.
    Plants are not included.
    their height varies between 10cm and widths between 8-14cm depending on the model.

     

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Minimalist vase in the shape of the crescent moon. Probably more technically a bud vase as the hole is small.
    These 3d printed impressive and unique decors will bring a new ambiance to your home.
    We use natural plastic PLA in our products.

    It was produced by hand by us.
    We produce Eco-friendly organic plastic.
    We use completely recyclable material, it is biodegradable and environmentally friendly.
    Unlike traditional petroleum-based plastics, it is made from cornstarch and sugar cane.
    Plants are not included.

    Product dimensions: (WxLxH): 8 x 15 x 16 cm

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    People Reading Book Planter Pot, Flowerpot for cactus and succulent, Succulent Planter, Zen Garden, Cactus Bob Planters, Home Decor

    It was produced by hand by us.
    We produce Eco-friendly organic plastic.
    We use completely recyclable material, it is biodegradable and environmentally friendly.
    Unlike traditional petroleum-based plastics, it is made from cornstarch and sugar cane.
    Plants are not included.

    Product dimensions: (WxLxH): 7x15x9cm

    Select options
  • Store:  Indian Heritage
    0 out of 5

    This is a 3d printed miniature model replica ADIYOGI MINIATURE REPLICA HANDCRAFT IDOL OF SHIVA MADE IN INDIA BEST ITEM FOR GIFT, PUJA AND CAR DASHBOARD, GOLD, 16.5 CM X 11 CM X 13 CM built using eco-friendly PLA.

    • Adiyogi Idol size: (L x W x H): 16.5 cm x 11cm x 13 cm | In Inches : 6.5 Inch x 4.35 Inch x 5.15 Inch
    • ATTENTION TO SMALLEST DETAILS – Attention Is Given To Even Smallest Details of Idols By Our Skilled force and Only When It Is Approved By Our Quality Assurance Team
    • A PERFECT GIFT: God Idols / Murti / Figurines / Idol Is Best Gift for Home, Marriage Anniversary, Parents, Mother’s Day, Father’s Day. Wedding Gift, Birthday, House Warming, Office / Shop Inauguration, Festive Occasions – Like Diwali, Rakhi, Grah Pravesh, and Corporate Gifts
    • Cleaning: Always Clean It with Soft Dry Cloth
    • Material: Marble Dust or Stone Dust | Package Contents: 1 Golden Colour Elegant Lord Adiyogi Idol

    Package Dimensions: 3.9 x 3.9 x 3.5 inches

    Add to cart
  • Store:  Indian Heritage
    0 out of 5

    This is a 3d printed miniature model replica ADIYOGI MINIATURE REPLICA HANDCRAFT IDOL OF SHIVA MADE IN INDIA BEST ITEM FOR GIFT, PUJA AND CAR DASHBOARD, GOLD, 16.5 CM X 11 CM X 13 CM built using eco-friendly PLA.

    • Adiyogi Idol size: (L x W x H): 16.5 cm x 11cm x 13 cm | In Inches : 6.5 Inch x 4.35 Inch x 5.15 Inch
    • ATTENTION TO SMALLEST DETAILS – Attention Is Given To Even Smallest Details of Idols By Our Skilled force and Only When It Is Approved By Our Quality Assurance Team
    • A PERFECT GIFT: God Idols / Murti / Figurines / Idol Is Best Gift for Home, Marriage Anniversary, Parents, Mother’s Day, Father’s Day. Wedding Gift, Birthday, House Warming, Office / Shop Inauguration, Festive Occasions – Like Diwali, Rakhi, Grah Pravesh, and Corporate Gifts
    • Cleaning: Always Clean It with Soft Dry Cloth
    • Material: Marble Dust or Stone Dust | Package Contents: 1 Golden Colour Elegant Lord Adiyogi Idol

    Package Dimensions: 3.9 x 3.9 x 3.5 inches

    Add to cart
  • Store:  Indian Heritage
    0 out of 5

    This is a 3d printed miniature model replica Ardhanarishvara – “the Lord Who is half woman.” built using eco-friendly PLA.

    About the Original Sculpture:
    Ardhanarishvara
    Tiruvenkadu, Thanjavur District. Height 101 cm. Around the 11th Century AD.
    The name Ardhanarishvara means “the Lord Who is half woman.” Siva is represented here as half-male and half-female, typifying the male and female energies. The right half represents Siva and the left Parvati. Siva has a jatamakuta with a crescent moon. He has three arms of which the lower armrests on the back of the bull, his vehicle., and the upper right has an axe. The whole of the right side is adorned with ornaments peculiar to Shiva. The right leg is bent and rests on the pedestal. The drapery is shown up to the knee. On the left side, the image has Karanda makuta. The drapery is up to the anklets and her leg is slightly bent, resting on the pedestal.

    Add to cart
  • Store:  Indian Heritage
    0 out of 5

    This is a 3d printed miniature model replica of the Ayodhya Ram Temple built using eco-friendly PLA.

    Architecture:
    A new design was prepared by the Sompura family in 2020, in accordance with traditional Hindu architectural principles and sciences. The Sompuras have been part of the temple design of over 100 temples all over the world for at least 15 generations.
    The temple will be 235 feet wide, 360 feet long, and 161 feet high. Once complete, the temple complex will be the world’s third-largest Hindu shrine. It is designed in the Nagara style of Indian temple architecture. The building will have a total of 366 columns. The columns will have 16 idols each to include the incarnations of Shiva, the 10 Avatars of Vishnu, and the 12 incarnations of the goddess Saraswati. The width of the stairs will be 16 feet. In accordance with scriptures dedicated to the design of temples dedicated to Vishnu, the sanctum sanctorum will be octagonal.

    What is it:
    One of the most important Hindu temples to be ever built in the history of India. As of 2021, this is an under-construction temple in city of Ayodhya, at the site believed to be the birthplace of Hindu god Ram.

    Add to cart
  • Store:  The Tree Thing
    0 out of 5

    Baby Groot pencil holder 3D model (unpainted). Made out of PLA plastic.

    8 cm in height / 3.14 inches

    !!!Please note!!!

    – 3D model objects are by no means perfect. Layers and defects may be visible.
    – You order an unpainted 3D model. If the model needs to be primed, select the appropriate item when ordering.
    – We can print this model in different sizes, so just send a message.

    Select options
  • Store:  Mouldwala
    0 out of 5

    This is an Among Us theme cookie cutter set and they are very sus lol. There are 4 total, a crewmate, ghost, dead body, and a cloud shape cutter. The crewmate, ghost, and dead body are parts of the game and the cloud I felt like was a good cookie shape for wording.

    One can write Among us, SUS, or “name” is sus on it. Lots of fun to be had. It is made with food-grade PLA bioplastic, washable warm soapy water.

    Add to cart
  • Store:  The Tree Thing
    0 out of 5

    A beautiful gift for Guardians of the Galaxy fans and plant lovers!! 3D Printed Cute Baby Groot Planter! Perfect for Succulents, Cactus & Air Plants.
    It has a tiny drainage hole to prevent over-moisturizing.

    DIMENSIONS

    Height – 4 inches (10 cm)
    Width – 2.7 inches (7 cm)
    Depth (from the front wall) – 3.6 inches (9.2 cm)
    Depth (from the back wall) – 2.4 inches (6 cm)

    ⌀ Diameter – 2.1 inches (5.5 cm)

    ! Please, pay close attention to measurements – pictures can be misleading for scale!
    ! Pencil Holder top is inclined!

    Select options
  • Store:  Eightyeightpots
    5 out of 5

    Human Head Planter Female Face Pot

    This planter pot is a great item for your indoor plants’ needs

    The products size is 12.0 cm x 15.1 cm x 14.0 cm

    Our products are specially produced in 3D printers. It is ideal for magnificent home decoration and office decoration. You can use the products with pleasure, there is no harm in terms of health. It is made entirely of organic materials.

    This product can be a gift for living room decoration. It can also be preferred as a homemade flower vase. It is good for a housewarming gift.

    I hope this brings you happiness and luck.

    Select options
  • Store:  Inchmetric
    4.5 out of 5

    A Sunflower Happy Face that looks happy because he wants you to be (rather than because he’s relishing the idea of sucking your soul out of your eye sockets), I have designed New Happy Face. He has a defined nose and softer cheek creases.

    Sunflower base can be found attached with the Happy Face.

    You get the option to customize the base and face colors according to your wall paint, just choose between the options below.

    Come on – stay HAPPY:-)

    Select options
  • Store:  Dear & Sacred
    0 out of 5

    3D printed sculpture of Michelangelo’s “David Bust”

    Touch of luxurious elegance to your house.

    Give your home décor a new look with stunningly beautiful art decoration.

    Add an elegant touch to any room.

    David is a masterpiece of Renaissance sculpture, created in marble between 1501 and 1504 by the Italian artist Michelangelo. David is a 5.17-meter (17.0 ft)[a] marble statue of the Biblical figure David, a favoured subject in the art of Florence.

    Add to cart
  • 5 out of 5

    This 3D printed replica of The Farnese Hercules is an ancient statue of Hercules, probably an enlarged copy made in the early third century AD and signed by Glykon, the statue was recovered in 1546 and is now in the Museo Archeologico Nazionale in Naples. The heroically scaled Hercules is one of the most famous sculptures of antiquity and has fixed the image of the mythic hero in the European imagination.

    3D Printed with Resin, PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
  • 5 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David’s Mind
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Weight: 400 gm
    Size: 15.0 x 14.5 x 21.7 cm
    Material: Plant-Based Resin

    Select options
  • Store:  Heighflier
    0 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David’s Mind
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Type Trait: Art Material
    Size: 6 Inch Height, 7 Inch Height
    Material: Plant-Based Resin

    Select options
  • Store:  Dream Decal
    0 out of 5

    Regional Feature: Europe
    Material: Resin
    Trade name: David
    Product name: STATUE
    Designation: Head Portraits
    Style: Michelangelo di Lodovico Buonarroti Simoni
    Role: Line Drawing Teaching Aids
    Home Decor
    Feature: Gypsum
    Type Trait: Art Material
    Size: 6.29″ x 3.74″ x 3.14 inches (16 x 9.5 x 8 cm)
    Material: Plant-Based Resin

    Add to cart
  • 5 out of 5

    Using a high-precision 3D scanner, we got a high-quality 3D model of a real Sleeping Bacchante. Using modern technologies for 3D printing, we have repeated the Sleeping Bacchante. Now you can put up a Sleeping Bacchante in your home.

    This robust torso was purchased in 1778 by the Grand Duke of Tuscany Peter Leopold from the Gaddi collection, which was located in Florence; nothing is known of the work prior to this date, except that it was part of the above-mentioned private collection.

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Select options
  • 5 out of 5

    This is a high-quality 3D printed replica of Sleeping Bacchante

    In Greek mythology, Bacchantes were the female followers of Dionysus. The name literally translates as “raving ones”, often portrayed as inspired by Dionysus into a state of ecstatic frenzy through a combination of dancing and intoxication.

    In art, Bacchantes are depicted either dancing or sleeping. They are often dressed in fox-skin, the penchant of their God. In this sculpture by Johan Peter Molin, the sleeping female is resting on a fox-skin, surrounded by empty chalices and grapevines.

    Made from Resin PLA bioplastic. The statue comes in 4 size options:

    Select options
  • 5 out of 5

    This is a high-quality 3D printed copy of The Mist Statue:

    The woman just got out of the water. The sculpture depicts mist, in folklore a natural phenomenon symbolizing a state between the real and the unreal. The actual motif, though, is the naked female body. It is a real woman expressing pleasure, and not ideal beauty, exposed to the viewer’s gaze. The Mist was very popular and several copies were made. One is at Strömparterren in Stockholm and another in the park of the Garden Society of Gothenburg.

    Select options
  • 5 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • 5 out of 5

    This 3D printed replica of The Veiled Lady, one of the numerous versions executed during the ’50s. Clearly alluding to a classical portrait bust, especially in the clean sweep of the lower edge, the bust transforms its prototype by the sensual treatment of stone and subject. The Veiled Lady (vestal virgin?) captures the perfection of innocence and youth, which, as the dew-fresh morning glories on her crown, will all too soon fade.

    As in The Veiled Lady, the marble is carved so ingeniously and thinly as to appear transparent in those parts where it extends over the facial features.

    3D Printed with Resin. Choose from the color options below:
    Select options
  • 5 out of 5

    This 3D printed replica of Roman-era Pentelic marble copy of Polykleitos’ Doryphoros on display at the Minneapolis Institute of Art. Although a bit battered and missing part of his left arm, he is still considered among the best-preserved copies in existence.

    To learn more about him, please see this link: Khan Academy. Also, you can check out the Wikipedia page.

    The MIA’s Doryphoros, dating from the 1st century B.C., is a Roman marble copy of a Greek bronze sculpture that was made between 450 B.C. and 440 B.C. by the sculptor, Polykleitos. It is the finest of the five known copies of the entire body of this famous masterpiece that has survived relatively intact.

    3D Printed with Resin. The sculpture comes in 3 size options (Mentioned Below):
    Select options
  • 5 out of 5

    This 3D printed replica of Michelangelo’s David Head Bust Art Sculpture. This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    The full statue of David can be found here.

    3D Printed with PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
  • 5 out of 5

    Michelangelo’s David Head Bust Portraits Art Sculpture Resin Crafts Concrete Decorations For Home Mini

    Product Name: David Head Bust Statue
    Size Information (Length Thickness Height):
    David: Width 9.5cm, Depth 9.5cm, Height 15cm
    Material: PLA Bio Plastic, Resin

    The surface is relatively smooth and delicate, much better than the average plaster. Can be used For art to copy from, as a still-life, or for life drawing.

    ☑️ This product is high-quality PLA bioplastic, resin. The surface is delicate and not fragile.
    ☑️ If it is dirty, it can be washed with water. Dip some washing powder and wipe the dirty place with a damp cloth.
    ☑️ The base is carefully welded and stable.

    Materials: Medium: Natural Biodegradable Plastic, Handmade
    Add to cart
  • 5 out of 5

    This 3D printed replica of Michelangelo’s David Head Bust Art Sculpture. This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    This is a scan from a cast of the original David by Michelangelo, a masterpiece of Renaissance art. The cropped bust was crafted in 1899 (Beckett number 756).

    The full statue of David can be found here.

    3D Printed with PLA bioplastic. The sculpture comes in 4 size options (Mentioned Below):
    Select options
  • 5 out of 5

    Benvenuti a Firenze, Italia!

    This is an amazing 3d printed Replica of Florence Cathedral Church originally known as The Cattedrale di Santa Maria del Fiore, commonly known as “Il Duomo”, is one of the most magnificent churches in Italy and the world. It was begun in 1296 in Gothic style and completed in 1436 with the dome engineered by Filippo Brunelleschi, a masterpiece of architecture and world landmark. Because of its enormous size and detail, it was a very ambitious project that took more than a century, and so it has several styles as time passed by.

    Made from PLA bioplastic. The statue comes in 7 color options more to come:

    Select options
  • Store:  Heighflier
    0 out of 5

    Meet Me Statue at St Pancras Station, London – 3D Printed Replica – Home Decor Centerpiece

    Original Statue is standing 30 feet (9 meters) high and weighing nearly eight tonnes, The Meeting Place (Bisou) is a solid bronze couple locked in embrace under the large concourse clock, giving the timepiece the semblance of a full, illuminated moon in the night sky. Produced in 2008 by sculptor Paul Day.

    Material: Natural, Handmade, PLA (Bioplastic)

    Size: 6.8cm x 5.3cm x 12.0 cm

    Weight: 32gm

    See more Sculptures: https://makersindia.in/store/heighflier/

    Select options
  • Store:  Heighflier
    0 out of 5

    This is a 3D printed replica of To Meet Again Sculpture in Thomas More Square at St Katharine’s Dock, London. Entitled To Meet Again, it was sculpted by Michel Beck in 1990. At this point, the Thames Path is pushed back from the riverside by modern developments.

    Material: Natural, Handmade, PLA (Bioplastic)

    Size: 5.4cm x 5.4cm x 12.5 cm

    Weight: 27gm

    See more Sculptures: https://makersindia.in/store/heighflier/

    Select options
  • 5 out of 5

    This 3D printed replica of To Meet Again Sculpture in Thomas More Square at St Katharine’s Dock, London. Entitled To Meet Again, it was sculpted by Michel Beck in 1990. At this point, the Thames Path is pushed back from the riverside by modern developments.

    Made from PLA bioplastic. The sculpture comes in 6 options:

    Product size:

    • Length: 10.6 Centimetres
    • Width: 10.6 Centimetres
    • Height: 24.5 Centimetres
    Select options
  • 5 out of 5

    This 3D printed replica of Sleeping Muse Sculpture by Constantin Brâncuși who was a Romanian sculptor, painter, and photographer who made his career in France. Considered a pioneer of modernism, one of the most influential sculptors of the 20th-century, Brâncuși is called the patriarch of modern sculpture.

    The subject of a sleeping head occupied Brancusi for almost twenty years. In conceiving and executing Sleeping Muse, the sculptor eschewed drama and detail in favor of reducing ideas to fundamental forms and simplified details. He rendered the essence of languor in the prostrate position of the head, weighed down by inertia, resting peacefully. This bronze is one of four casts made in 1910 from the marble of the previous year for which Baroness Renée Irana Franchon was the model.

    Made from PLA bioplastic weight 1 kg approx. The sculpture comes in 5 options:

    Product size:

    • Length: 22.5 Centimetres
    • Width: 18.3 Centimetres
    • Height: 14.4 Centimetres
    Select options
  • 5 out of 5

    This 3D printed replica of the Julius Caesar Bust at The Metropolitan Museum of Art, New York. This Marble sculpture at the Metropolitan Museum of Art in New York was sculpted by Andrea di Pietro di Marco Ferrucci (1465 – 1526) circa 1512-14 where it is on permanent display. Gaius Julius Caesar was a Roman general, statesman, Consul, and notable author of Latin prose. He played a critical role in the events that led to the demise of the Roman Republic and the rise of the Roman Empire.

    Made from PLA bioplastic. The statue comes in 5 options:

    Product size:

    • Length: 4.8 Centimetres
    • Width: 8.2 Centimetres
    • Height: 12.5 Centimetres
    Select options
  • 5 out of 5

    This 3D printed replica of the Home Decor Sculpture – Reclining Venus with Cupid kept in Buckingham Palace, which was made for Lord Cawdor in 1814 and ceded by him to the Prince Regent. This work, commissioned by the fourth earl of Darnley, was completed by Canova’s assistants after his death and delivered to the earl at Cobham Hall in Kent in 1824.

    Made from PLA bioplastic. The statue comes in 5 options:

    Product size:

    • Length: 225 Centimetres
    • Width: 95 Centimetres
    • Height: 98 Centimetres
    Select options
  • Store:  Heighflier
    0 out of 5

    This is a 3d printed bust of Harvey Dent Two-Face from the original Batman movie series “The dark knight rises”. The bust comes in a single color but does have a variety of colors to choose between.

    Dimension:

    • Length: 16.8 cm | 6.6 in
    • Width: 12.9 cm | 5 in
    • Height: 10.4 cm | 4.1 in

    Material: Resin, PLA plastic

    PLA is an eco-friendly, biodegradable plastic derived from plant fibers, which is a renewable organic resource.

    Find more awesome knick-knacks at https://www.makersindia.in/store/heighflier/

    These are not mass-produced products. Each one is individually made to order in our own home workshop. We check all items carefully by hand. Due to the 3D printing process, smaller imperfections may occur.

    We value our customers and strive for excellent products & services. That’s why we offer 100% satisfaction guaranteed or your money back!

    Select options
  • Store:  Heighflier
    0 out of 5

    This is a 3d printed bust of Harry Potter (Daniel Radcliffe) from the original Harry Potter movie series. The bust comes in a single color but does have a variety of colors to choose between.

    Dimension:

    • Length: 8.0 cm | 3.2 in
    • Width: 8.1 cm | 3.2 in
    • Height: 12.0 cm | 4.8 in

    Material: Resin, PLA plastic

    PLA is an eco-friendly, biodegradable plastic derived from plant fibers, which is a renewable organic resource.

    Find more awesome knick-knacks at https://www.makersindia.in/store/heighflier/

    These are not mass-produced products. Each one is individually made to order in our own home workshop. We check all items carefully by hand. Due to the 3D printing process, smaller imperfections may occur.

    We value our customers and strive for excellent products & services. That’s why we offer 100% satisfaction guaranteed or your money back!

    Select options
  • Store:  Heighflier
    0 out of 5

    This is a 3d printed bust of Albus Dumbledore from the Original Harry Potter movie series. The bust comes in a single color but does have a variety of colors to choose between.

    Dimension:

    • Length: 6.7 cm | 2.6 in
    • Width: 7.8 cm | 3 in
    • Height: 12.0 cm | 4.8 in

    Material: Resin, PLA plastic

    PLA is an eco-friendly, biodegradable plastic derived from plant fibers, which is a renewable organic resource.

    Find more awesome knick-knacks at https://www.makersindia.in/store/heighflier/

    These are not mass-produced products. Each one is individually made to order in our own home workshop. We check all items carefully by hand. Due to the 3D printing process, smaller imperfections may occur.

    We value our customers and strive for excellent products & services. That’s why we offer 100% satisfaction guaranteed or your money back!

    Select options
  • 5 out of 5

    This is an amazing USA White House Replica in Washington DC. Replicated here and 3D printed from a scan of the original United States White House located at 1600 Pennsylvania Avenue NW in Washington, D.C.

    Also, check the USA Capitol Building https://www.makersindia.in/product/us-capitol-building-replica/

    For more monuments and statues pls check https://www.makersindia.in/store/greekstonestudio/

    Made from PLA bioplastic. The statue comes in 3 different sizes and 5 color options:

    Select options
  • 5 out of 5

    This is an amazing replica of the US Capitol building in Washington DC. Replicated here and 3D printed from a scan of the original United States Capitol in the Capitol Hill at the eastern end of the National Mall in Washington, D.C. Own it today!

    For the Smaller version pls check https://makersindia.in/product/us-capitol-building-replica/

    Made from PLA bioplastic. The statue comes in 5 options:

    Select options
  • 5 out of 5

    This is an amazing replica of the US Capitol building in Washington DC. Replicated here and 3D printed from a scan of the original United States Capitol in the Capitol Hill at the eastern end of the National Mall in Washington, D.C. Own it today!

    Made from PLA bioplastic. The statue comes in 4 options:

    Select options
  • Store:  Dear & Sacred
    0 out of 5

    You can get lost in a good book ?!
    This will…transport you to another place, another time, and even other realms.

    It is a 3D Printed Magic Book With Medieval Castle for Bookshelf Insert, Library decor gives a magical look to your reading sessions. One can insert a LED light inside the castle miniature to make it more magical.

    Not your thing? Well, check out my other designs here: https://www.makersindia.in/store/dear-sacred/

    Made from PLA bioplastic. The statue comes in 5 options:

    Select options
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed Pikachu Cookie Cutter has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed Peace Sign Polymer Clay Cutter has been crafted for durability and quality.

    This is a Peace sign cutter for Polymer Clay.

    The Cutter makes an end product approximately 40mm in diameter.

    I appreciate any feedback and would love to see your projects. Thank you.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    These 3D-printed Santa Boot Cookie Cutter have been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The cookies are about 52mm x 53mm.

    Tray Types:

    Santa Boot Cookie Cutter (2×1)
    Santa Boot Cookie Cutter (4×4)

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Select options
  • Store:  Mouldwala
    0 out of 5

    These 3D-printed Moose Cookie Cutter have been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The elk cookies are about 62mm long.

    Tray Types:

    Moose Cookie Cutter (2×1)
    Moose Cookie Cutter (2×3)

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Select options
  • Store:  Mouldwala
    0 out of 5

    These 3D-printed Mittens Cookie Cutters have been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The cookies are about 35mm x 38mm and 26mm x 35mm large.

    Tray Types:

    Mittens Cookie Cutters (2×1)
    Mittens Cookie Cutters (4×2)

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Select options
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed Heart With Wings Cookie Cutter has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.
    The cookie is about 88mm x 39mm large.

    Tray Types:

    Heart With Wings Cookie Cutter (2×1)
    Heart With Wings Cookie Cutter (4×1)

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Select options
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed New Year Cookie Cutter – Hat With Cloverleaf has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    I don’t really get what the fuss is about unicorns right now (it’s a horse with a horn, so what?), but since they ARE so popular how about putting a unicorn’s head in your cookie jar?

    This 3D-printed Unicorn Cookie Cutter Christmas Present has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    This is a unicorn cookie cutter.
    It’s a sweet little Christmas present for all those unicorn fanboys and
    fangirls! 😉

     

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    A gingerbread man cookie cutter for the holiday season

    This 3D-printed Gingerbread cookie cutter has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed Santa Boots In A Boot Cookie Cutter has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The cookies are about 52mm x 53mm large.

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Add to cart
  • Store:  Mouldwala
    0 out of 5

    This 3D-printed Elf Shoes Cookie Cutter has been crafted for durability and quality. All cutters designed, engineered, and tested by a fellow cookie enthusiast.

    The shoes are about 53mm x 42mm large.

    Tray Types:

    Elf Shoes Cookie Cutter (2×1)
    Elf Shoes Cookie Cutter (2×4)
    Elf Shoes Cookie Cutter (3×4)

    To get the details when baking you need a dough that doesn’t run much and is rolled out as thinly as possible. The photo shows my first attempts. But even if something goes wrong, you can easily see what it should be.

    Select options

Cart

Your Cart is Empty

Back To Shop